Grams to Pounds
Grams and pounds are both masses, so the conversion between them is a single exact number and nothing else: one pound is 453.59237 grams by definition. Set the value, read it either way, and see the same mass in every other unit underneath.
Result
Exact — Both unit definitions are exact, so this relationship is exact by definition; only the displayed digits are rounded.
Round-trip check passed Converting the unrounded result back to grams reproduces the input within 1 part in 10¹². This is an inverse-consistency check of the engine, not an independent authority.
- Formula
lb = g × 0.00220462262185- Conversion factor
- 1 gram = 0.00220462262185 lb
- Definitions
- 1 gram = 0.001 kg (exact)
- 1 pound = 0.45359237 kg (exact)
- Definition status
- Exact
- Source
- BIPM (International Bureau of Weights and Measures) — The International System of Units (SI Brochure), 9th edition
United States — Federal Register — Refinement of Values for the Yard and the Pound (1959 international yard and pound agreement), 24 FR 5348 - Last reviewed
- 2026-08-07
- Rounding
- Auto rounding (up to 10 significant digits shown); internal values are unrounded.
Calculation receipt
- Question
- Convert 100 grams to pounds
- Input
- 100
- Interpreted as
- 100 grams (g)
- Method
- Normalize through the canonical base unit (kg) using the registry definitions, then apply display rounding last.
- Formula
- lb = g × 0.00220462262185
- Substitution
- 100 × 0.00220462262185 = 0.22046226218487758
- Steps
- Interpret the input: “100” → 100 grams.
- Normalize to the canonical base (kg): 100 × 0.001 = 0.1 kg.
- Convert the base value to pounds: 0.1 kg ÷ 0.45359237 = 0.22046226218487758 lb.
- Round for display only: 0.2204622622 lb (auto rounding (up to 10 significant digits shown)).
- Exact result
- 0.22046226218487758 lb (unrounded IEEE-754 double)
- Decimal result
- 0.2204622622 lb
- Verification (passed)
- Converting the unrounded result back to grams reproduces the input within 1 part in 10¹². This is an inverse-consistency check of the engine, not an independent authority.
- Precision
- Auto rounding (up to 10 significant digits shown); internal values are unrounded.
- Engine
- conversion-engine v1.0.0 · receipt 1.0.0
About the gram
- Symbol
- g
- Quantity
- Mass
- System
- SI
- Definition
- 1 gram = 0.001 kg
- Exactness
- Exact
- Also written
- gramme, grammes
- Status
- Current
About the pound
- Symbol
- lb
- Quantity
- Mass
- System
- International (US & Imperial)
- Definition
- 1 pound = 0.45359237 kg
- Note
- Avoirdupois pound: exactly 0.45359237 kg (1959 agreement).
- Exactness
- Exact
- Also written
- lbs, pound-mass, lbm
- Status
- Current
100 grams in other mass units
| Unit | Value | Symbol | System |
|---|---|---|---|
| milligram | 100000 | mg | SI |
| kilogram | 0.1 | kg | SI |
| ounce (avoirdupois) | 3.527396195 | oz | International (US & Imperial) |
| pound | 0.2204622622 | lb | International (US & Imperial) |
| tonne (metric ton) | 0.0001 | t | Metric (non-SI) |
| short ton (US) | 0.0001102311311 | ton (US) | US customary |
Metric & Imperial conversion chart
Every figure below is generated by the same canonical engine as the calculator — there is no separately maintained table to drift out of date. “Exact” means the relationship is exact by definition; only the displayed digits are rounded.
Length
| Unit | Equals | Unit | Equals | Status |
|---|---|---|---|---|
| 1 inch | 2.54 cm | 1 centimeter | 0.3937007874 in | Exact |
| 1 foot | 0.3048 m | 1 meter | 3.280839895 ft | Exact |
| 1 yard | 0.9144 m | 1 meter | 1.093613298 yd | Exact |
| 1 mile | 1.609344 km | 1 kilometer | 0.6213711922 mi | Exact |
Mass (weight)
| Unit | Equals | Unit | Equals | Status |
|---|---|---|---|---|
| 1 ounce (avoirdupois) | 28.34952313 g | 1 gram | 0.03527396195 oz | Exact |
| 1 pound | 0.45359237 kg | 1 kilogram | 2.204622622 lb | Exact |
| 1 stone | 6.35029318 kg | 1 kilogram | 0.1574730444 st | Exact |
| 1 short ton (US) | 0.90718474 t | 1 tonne (metric ton) | 1.102311311 ton (US) | Exact |
| 1 long ton (Imperial) | 1.016046909 t | 1 tonne (metric ton) | 0.9842065276 ton (UK) | Exact |
Volume — US and Imperial are different systems
| Unit | Equals | Unit | Equals | Status |
|---|---|---|---|---|
| 1 US fluid ounce | 29.57352956 mL | 1 milliliter | 0.0338140227 US fl oz | Exact |
| 1 Imperial fluid ounce | 28.4130625 mL | 1 milliliter | 0.03519507973 imp fl oz | Exact |
| 1 US liquid pint | 0.473176473 L | 1 liter | 2.113376419 US pt | Exact |
| 1 Imperial pint | 0.56826125 L | 1 liter | 1.759753986 imp pt | Exact |
| 1 US liquid gallon | 3.785411784 L | 1 liter | 0.2641720524 US gal | Exact |
| 1 Imperial gallon | 4.54609 L | 1 liter | 0.2199692483 imp gal | Exact |
Area
| Unit | Equals | Unit | Equals | Status |
|---|---|---|---|---|
| 1 square inch | 6.4516 cm² | 1 square centimeter | 0.15500031 in² | Exact |
| 1 square foot | 0.09290304 m² | 1 square meter | 10.76391042 ft² | Exact |
| 1 square yard | 0.83612736 m² | 1 square meter | 1.195990046 yd² | Exact |
| 1 acre | 0.4046856422 ha | 1 hectare | 2.471053815 ac | Exact |
| 1 square mile | 2.58998811 km² | 1 square kilometer | 0.3861021585 mi² | Exact |
Temperature — formulas, not multipliers
Temperature scales have different zero points, so conversion is an affine formula rather than a single factor:
| Conversion | Formula | Check |
|---|---|---|
| Celsius → Fahrenheit | °F = °C × 9/5 + 32 | 100 °C = 212 °F |
| Fahrenheit → Celsius | °C = °F × 5/9 − 17.7777777778 | 32 °F = 0 °C |
| Celsius → Kelvin | K = °C + 273.15 | 100 °C = 373.15 K |
| Kelvin → Celsius | °C = K − 273.15 | 0 K = -273.15 °C |
Metric prefixes
The full current set of SI prefixes (BIPM SI Brochure, 9th edition). A prefix scales any SI unit by a power of ten: 1 km = 10³ m, 1 μg = 10⁻⁶ g. Binary data prefixes (Ki, Mi, Gi — powers of 1024) are a separate IEC system covered in the data-storage units.
| Prefix | Symbol | Factor | Decimal |
|---|---|---|---|
| quetta | Q | 10³⁰ | |
| ronna | R | 10²⁷ | |
| yotta | Y | 10²⁴ | |
| zetta | Z | 10²¹ | |
| exa | E | 10¹⁸ | |
| peta | P | 10¹⁵ | |
| tera | T | 10¹² | |
| giga | G | 10⁹ | |
| mega | M | 10⁶ | 1000000 |
| kilo | k | 10³ | 1000 |
| hecto | h | 10² | 100 |
| deca | da | 10¹ | 10 |
| deci | d | 10⁻¹ | 0.1 |
| centi | c | 10⁻² | 0.01 |
| milli | m | 10⁻³ | 0.001 |
| micro | μ | 10⁻⁶ | 0.000001 |
| nano | n | 10⁻⁹ | |
| pico | p | 10⁻¹² | |
| femto | f | 10⁻¹⁵ | |
| atto | a | 10⁻¹⁸ | |
| zepto | z | 10⁻²¹ | |
| yocto | y | 10⁻²⁴ | |
| ronto | r | 10⁻²⁷ | |
| quecto | q | 10⁻³⁰ |
How to use the conversion calculator
1. Pick the quantity you are converting — length, weight (mass), volume, temperature, or one of sixteen more families. 2. Enter the value; typing a unit with the number (3.8m, 12 ft 6 in) sets the source unit automatically when it is unambiguous. 3. Choose the From and To units — search accepts symbols and everyday aliases like lbs, micron or nautical. 4. Read the result with its formula, factor, exactness label and source, and use the precision control if you need fixed decimals or significant figures.
Metric, Imperial and US customary units
The metric system (SI) scales every unit by powers of ten and underpins all modern definitions — since 1959 even the inch, foot, yard, mile and pound are defined exactly in metric terms. “Imperial” and “US customary” are often treated as one system, but they are not universally identical: lengths and weights match, while volumes differ materially. The Imperial gallon (4.54609 L) is about 20% larger than the US gallon (3.785411784 L), Imperial pints beat US pints, and — counterintuitively — the US fluid ounce is slightly larger than the Imperial one. Any unlabeled “gallon” or “fluid ounce” is therefore ambiguous, which is why this calculator asks instead of guessing.
Exact and approximate conversions
Whether a conversion is exact is a property of the definition, not of how many decimals you see. 1 in = 2.54 cm terminates quickly and is exact; 1 m = 3.280839895… ft has endless decimals yet is equally exact, because both derive from the same exact definition. Conventional values (the 4.184 J calorie, 9.80665 m/s² standard gravity, the 365.25-day Julian year) are exact by agreement. Genuinely approximate factors exist only where a unit rests on a measured constant, like the dalton — and no number of stored digits makes those exact. The calculator labels every result with the correct category.
How conversion factors work
Most conversions are a single multiplication: the value is multiplied by the source unit's factor to reach the quantity's canonical base (meters, kilograms, seconds…), then divided by the target unit's factor. Two families break the simple-multiplier rule. Temperature is affine — °F = °C × 9/5 + 32 — because the scales start at different zeros. Fuel consumption is reciprocal — L/100 km = 235.215 ÷ mpg (US) — because one measures distance per fuel and the other fuel per distance, so halving one doubles the other.
Common conversion mistakes
- US vs Imperial gallons and fluid ounces. A UK “40 mpg” car does about 33 mpg in US gallons; a US pint of beer is 20% smaller than a UK pint. Always label the system.
- Ounce vs fluid ounce. oz is mass (28.35 g); fl oz is volume (29.57 mL US / 28.41 mL Imperial). They only coincide, roughly, for water.
- Mass vs volume. Grams cannot become milliliters without a density. A cup of flour and a cup of honey weigh very different amounts.
- Tonne vs short ton vs long ton. 1000 kg vs 907.18474 kg vs 1016.0469088 kg — an unlabeled “ton” can be off by more than 10%.
- kB vs KiB. Decimal 1000-based and binary 1024-based prefixes diverge by 7.4% at the terabyte scale — the “missing space” on a new drive.
- Mass vs force. Kilograms convert to pounds (mass), not to newtons or pounds-force; weight needs gravity (1 kgf = 9.80665 N by convention).
- US survey vs international foot. They differ by 2 ppm — irrelevant for a room, material for state-plane coordinates; the survey foot was deprecated in 2023.
- Regional cooking measures. A metric cup is 250 mL, a US cup 236.59 mL, an Australian tablespoon 20 mL vs 15 mL elsewhere.
- Rounding too early. Convert with the full factor and round once at the end — chaining rounded factors compounds the error. This engine never rounds internally.
A short history
The meter began in 1795 as one ten-millionth of the pole-to-equator distance and is now defined by the speed of light; the kilogram shed its physical prototype in 2019 for a definition via the Planck constant. The 1959 international yard-and-pound agreement ended centuries of slightly different national inches by fixing 1 yd = 0.9144 m and 1 lb = 0.45359237 kg exactly — the reason today's US and UK lengths agree while their older, separately standardized volume measures still differ.
How CalcDomain verifies unit conversions
- Every unit belongs to exactly one semantic quantity; compatibility is decided by quantity, never by raw dimensions, so energy≠torque and mass≠volume.
- Values are normalized through the quantity's canonical base unit (meter, kilogram, kelvin, joule…) — never through chained pairwise factors.
- Each definition cites a named authoritative reference: BIPM SI Brochure, NIST SP 811 / Handbook 44, the 1959 US yard-and-pound refinement, the UK Weights and Measures Act 1985, ISO/IEC 80000, IAU resolutions, CODATA.
- Exact relationships are stored at full definitional precision; nothing is pre-rounded for storage.
- Display rounding happens last and is recorded in the receipt; the unrounded value is always shown alongside.
- Ambiguous terms (gallon, ton, fluid ounce, cup, horsepower, mil, kB…) stay distinct — the calculator asks which variant you mean.
- The server-rendered result and the in-browser result come from the same engine source, so they cannot disagree.
- Automated tests pin the exact reference vectors (1 in = 2.54 cm, 1 lb = 0.45359237 kg, 1 US gal = 3.785411784 L, 0 °C = 32 °F, 1 mL ≈ 0.0338140227 US fl oz) plus identity and round-trip invariants for every unit on every build.
- Source metadata is reviewable on the page — every factor links to the document that defines it.
Author: Ugo Candido · Last reviewed: · Engine: conversion-engine v1.0.0 · Every conversion runs in your browser; values are never sent to a server. The round-trip check is an internal consistency check, not third-party review. See the public changelog.
Authoritative sources
Every unit definition in the registry cites one of these primary references. No conversion website is ever used as an authority for a constant.
- BIPM (International Bureau of Weights and Measures) — The International System of Units (SI Brochure), 9th edition
- NIST (National Institute of Standards and Technology) — Special Publication 811 — Guide for the Use of the International System of Units, Appendix B
- NIST Office of Weights and Measures — Handbook 44, Appendix C — General Tables of Units of Measurement
- United States — Federal Register — Refinement of Values for the Yard and the Pound (1959 international yard and pound agreement), 24 FR 5348
- United Kingdom — legislation.gov.uk — Weights and Measures Act 1985, Schedule 1
- ISO (International Organization for Standardization) — ISO 80000-3 — Quantities and units, Part 3: Space and time
- IEC (International Electrotechnical Commission) — IEC 80000-13 — Quantities and units, Part 13: Information science and technology
- IAU (International Astronomical Union) — IAU 2012 Resolution B2 (astronomical unit) and 2015 Resolution B2 (parsec relation)
- CODATA / NIST Fundamental Physical Constants — CODATA Internationally Recommended Values of the Fundamental Physical Constants
- ISO — ISO 2533:1975 — Standard Atmosphere
Frequently asked questions
How many grams are in a pound?
453.59237 grams, exactly. It is not a rounded measurement — the 1959 International Yard and Pound Agreement defined the pound as that number of grams, so the digits terminate there and every one of them is exact.
Is 454 grams close enough?
For cooking, yes: the error is under a tenth of a percent, far below what a kitchen scale resolves. For anything priced or regulated by weight it is not, because the rounding always runs the same direction and accumulates. A shipment of a thousand one-pound items comes out 408 grams heavy on the 454 approximation.
Why does my gold weight not convert correctly?
Precious metals are weighed in troy ounces, not avoirdupois ones. A troy ounce is 31.1034768 g against the ordinary ounce's 28.349523125 g, and a troy pound has 12 of them rather than 16 — so a troy pound is 373.24 g where an ordinary pound is 453.59. Converting a gold weight with the everyday factor overstates it by about 21%.
How do I get pounds and ounces instead of a decimal?
Take the whole number of pounds, then multiply what is left by 16. 0.5512 lb is 0 lb and 0.5512 × 16 = 8.8 oz. The equivalents table below does this for you — it reads the same mass in ounces directly, so you can pair the whole pounds with the remainder without doing the arithmetic twice.
Can I convert grams to fluid ounces here?
No, and nothing can without knowing what the substance is. A fluid ounce measures volume and a gram measures mass; the bridge between them is density, which differs for every ingredient. Water happens to sit near 29.6 g per US fluid ounce, which is why the two get confused, but flour is nearer 15 g and honey nearer 42 g for the same volume.
Is a UK pound the same as a US pound?
Yes. That is exactly what the 1959 agreement settled: before it, the US and Imperial pounds differed in the last few digits, and six countries adopted the single 453.59237 g definition to end the discrepancy. A pound in a British recipe and a pound on an American scale are now the same mass.